Fiber Optic Taper#2 - 600x599
Fiber Optic Taper
  • Magnification (Minification) ratio up to 4:1
  • Resolution up to 125 lp/mm (Small end)
  • No focusing distance is required,Enable a higher coupling efficiency.
  • Expand photosensitive area of CMOS/CCD
  • Compact Design, easier to integrate.

The fiber optic tapers provide a method of minify or magnify an image with minimum distortion in image transfer applications.
All tapers are fabricated to customer specific requirements and can be machined into configurations from round to round, square to square, round to square or rectangular.

Application: Radiography / Fluorescence / Imaging / Light Field Camera.

Fiber Diameter (Small End) > 3um
Numerical Aperture (N.A) – Small End 1.0
Resolution
25 – 125 Lp/mm
Magnification Ratio
1:2 / 1:3 / 1:4 or Higher
Core – Clad Ratio
60/40 – 75/25
EMA Absorber
Interstitial / Without

** Vacuum Tightness,Thermal Expansion, Csl(Tl),Transmission Data,Please Contact us.

Material TypeNumerical Aperture (Small End)Fiber Size (Small End)Core-Clad RatioWavelengthTransmittance @380nm/550nm/850nm
OS-ST1.0> 3um60/40 ~ 75/25400nm - 950nmNA / 75% / 68%
NEU-HT0.8> 3um60/40 ~ 75/25400nm - 950nmNA / 80% / 74%
Numerical Aperture on Big End is lower than Small EndHigher Core-Clad ratio could be available with larger fiber sizeTransmittance is measured with raw material of 5mm thickness

Please Contact us for further information (Thermal Expansion,Vacuum Tightness,Xray Attenuation,High Voltage etc..)

** Material from 3rd Party are also available for production

Following explanation to the terms that you should know about Fiber Optic Plates.

1.Fiber Diameter (Pitch)

Diameter of a fiber strand / Distance between fiber centering

2.Numerical Aperture

Capability of light gathering of fiber optic components.

3.Resolution

The measure of how closely lines can be resolved in one milimeter

4.EMA

Extra Mural Absorption(EMA) are small black fibers that inserted between 2 fiber strands. Which will absorb stray light between fibers.

5.Core

The transmitting part of the fiber optic wave guide. (Core usually has higher refraction index than cladding)

6.Cladding

The cover outside core, cladding has a lower index of refraction than core.

7.Packing Fraction

Ratio of Core area to Total area, this will shows the light transmission efficiency of the component.

9.Transmission

Comparison between Output light intensity and Input Light Intensity

10.Optical Crosstalk

The light escape from one fiber strand and get into another fiber.

11.Blemish

Blemishes are the area where transmission is reduced. Blemish is caused by contaminants along in the fibers.

12.Chickenwire

Chicken wire appear likes a black line on the components. The result of chicken wire is due to mal-control of temperature or pressure during the procedure.

13.Coefficient Thermal Expansion

CTE defined as the changing of dimension when the fiber components exposed to changing temperature environment

14.Shear Distortion

Shear distortion is cause by the misalignment of fiber during fusion process.

Shear Distortion Redraw

 

 

 

 

 

 

 

15.Gross Distortion

Gross Distortion is cause by in-proper Temperature/Pressure and Material input procedure.

Gross Distortion Redraw

Contact with us

Send message

Fiber Optic Taper (Round to Round Type)

Model Type

Magnification Ratio

Fiber Diameter(μm)

Resolution(lp/mm)

Numerical Aperture

Core/Clad Ratio

Remark

FOT2x 2:1 6/104 1.0 60/40 N/A
FOT3x 3:1 6/104 1.0 60/40 N/A
FOT4x 4:1 6/104 1.0 60/40 N/A
FOT25a 25: 2/3″ 6/104 1.0 60/40 25mm to 2/3″ CCD
FOT25b 25: 1/2″ 6/104 1.0 60/40 25mm to 1/2″ CCD
FOT18a 18: 1/2″ 6/104 1.0 60/40 18mm to 1/2″ CCD

** Other Specification are available upon requests

Round to Round Taper

Round to Round Taper

Fiber Optic Taper (Linear to Linear Type)

Model Type

Dimension

Fiber Diameter(μm)

Resolution(lp/mm)

Numerical Aperture

Core/Clad Ratio

Remark

 L64-25  6.4×2.5mm to 12.8×5.0mm 6/104 1.0 60/40 N/A
 L64-05  6.4×0.5mm to 12.8×1.0mm 6/104 1.0 60/40 N/A
 L128-25

12.8×2.5mm to

25.6mm×5.0mm

6/104 1.0 60/40 N/A
 L128-05

 12.8×0.5mm to

25.6×1.0mm

6/104 1.0 60/40 25mm to 2/3″ CCD
 L256-25

25.6×2.5mm to

51.2×5.0mm

6/104 1.0 60/40 25mm to 1/2″ CCD
 L256-05

25.6×0.5mm to

51.2×1.0mm

6/104 1.0 60/40 18mm to 1/2″ CCD

** Other Specification are available upon requests

Optional Service

■ Fiber Optic Taper bonding into Array

■ Fiber Optic Taper coupling to CCD/CMOS/OLED

Line Type Taper

Linear to Linear Taper