Measurement of Fiber Optic Imaging Device Parameters

Citation

"Measurement of Fiber Optic Imaging Device Parameters" by Wang Gao, Wang Xiaoyan, and Md. Zahurul Islam was published in the proceedings of the 2009 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). The DOI for this article is 10.1109/IST.2009.5071646. 

Keywords

  • component
  • fiber optic imaging device
  • transmittance, parameter measurement
  • integral sphere
  • CCD camera 

Brief

This article presents a new method for testing the parameters of fiber optic imaging devices, using a single integral sphere and a CCD camera to measure parameters such as transmittance and distortion.

Summary

A new method for testing the parameters of fiber optic imaging devices, such as fiber optic tapers (FOT), fiber optic plates (FOP), and fiber optic inverters (FOI), is proposed. This method utilizes a single integral sphere and a CCD camera to measure various parameters. Some of the advantages of this method include a simple structure, the ability to obtain a wealth of information, and fast testing operation. The parameters that can be measured include total or partial transmittances, center-edge transmittances relative errors, resolution target, and pincushion and barrel distortions. This is achieved by processing the CCD images of the fiber optic imaging devices. The testing principle was analyzed and proven feasible through experiments.

Origin: https://www.researchgate.net/publication/241159789_Measurement_of_fiber_optic_imaging_device_parameters

返回博客