标准光纤板(sFOP)
标准光纤板(sFOP)
FOP 的表面可以制成不同的形状,如凹面、凸面、台阶、平面,这样更容易耦合到不同的设备和系统。(例如同心相机)。
FOP 还可以充当光隔离器,分离输入和输出空间。并吸收光纤之间的光串扰。
Specification
-
Single Fiber diameter
Smaller fiber size means higher resolution. (2.5um = 218lp/mm , 6um = 114um )
- 2.5um
- 3um
- 4um
- 6um
-
Maximum Size (Diagonal)
Production cost will increase sharply once diagonal surpass 130mm. If you need a bigger size, please contact us.
- Max. size: Φ200mm
-
Thickness
With a larger size of FOP, the minimum thickness required will also go up in order to maintain the structure. Usually thickness will go around 1mm - 3mm.
- Minimum 0.2mm
- Typical 1-3mm
- High Range 5mm+
-
EMA Absorber
EMA are special fibers insert in-between the standard fibers. They are using to absorb stray light between fibers. But at a cost of lowering the overall transmission.
- Interstitial EMA (Left)
- Without EMA (Right)
-
Numerical Aperture
Numerical Aperture are decided by the material using to produce the FOP.
- NA = 1.0 (LEFT)
- NA = 0.8 (RIGHT)
-
Transmission
detailed testing resultsFOP are produced from multi-component glass. Which has the highest transmission in VIS to NIR range.
Tested a sFOP of 3mm thickness, with EMA absorber, collimated light.
- 70% - 82% (400nm - 2500nm)
Resolution
-
4µm FOP Sample
143 linepair / mm
-
6µm FOP Sample
90.5 linepair / mm
Applications Examples
Concentric / Monocentric Camera
- The FOP is used to couple this spherical focal surface to a flat image sensor.
- The FOP acts as an interface between the curved focal surface and the flat image sensor.
- It has a spherical input surface matching the focal surface curvature and a flat output surface matching the image sensor.
- The FOP consists of millions of optical fibers arranged in a hexagonal pattern.
-
A Concave Surface Fiber Optic Plate